The ServoXciter EF is a precision servo driver and tester which makes setting up your model's linkages and throws extremely simple and also gives you unprecedented tools for troubleshooting servos and receivers.

• Manual drive with microprocessor precision.
• One-touch servo centering.
• Servo current meter.
• Automatic sweep with 32 speeds.
• Servo deadband check.
• Custom servo movement record and playback.
• Receiver pulse check.
• Receiver glitch detection.
• Receiver battery voltage display.
• High Frame Rate mode (with narrow pulse ability).
• FASST 2.4 ghz receiver ready.
• DC power jack - for 8 to 12 volt wall transformer (with 0.70m ID, 2.35mm OD plug - positive center).

The ServoXciter EF is the favorite tool for all levels of modelers - from the beginner hobbyist to the professional UAV technician!

Learn more about this $84.95 super tool.

ServoXciters have been reviewed in major R/C publications. View some of the excerpts here.

The ServoXciter Jr. is the small, bare-bones brother to the ServoXciter EF. The ServoXciter Jr. fills the gap between the modeller that wants all the features of the EF and the modeller that just wants a precision servo driver and tester.

• Manual drive with microprocessor precision.
• Easy servo centering.
• Automatic sweep with 10 speeds.
• Center and end-point memory.
• Overdrive range.

You can't afford NOT to own the ServoXciter Jr.

Learn more about this $29.95 junior tool.

R/C Voltage Monitor with Glitch or Failsafe Counting and Peak Low Voltage at 1000 samples per second!

NEW!January 2009: 20 Voltage Ranges.

VoltMagic will MEMORIZE instantaneous low voltages DOWN TO < 3.4 VOLTS! Peak Low Voltage is the absolute lowest voltage. It shows if your switch, wiring, connectors, battery/regulator are really doing their job with your servo amperage.

• 4 or 5 cell NiCd or NiMh
• 4.9 - 7.0 Regulator / BEC
• 2 cell series A123 (6.6)
• 2 cell series Li (7.4)
• Averaged voltage indication
• Adjustable warning for low mAH remaining
• Adjustable Peak Low Voltage ranges
• 1000 samples per second
• Glitch or Failsafe counting
• Calibrated within 0.015 volts